Hydrotech ZS Consulting

Water quality monitoring equipment, Hydrotech, Hydrolab, YSI, In-situ, Eureka, EXO, Sondes, Multiprobes, Sensors, Monitoring equipment, Hydrolab repair, YSI repair, Nitrate, Nitrite, pH, Dissolved Oxygen, Turbidity, Conductivity, Salinity

E-HUB-V2

Total connectivity to your EXO® unit in the field

IF you have an EXO® multiprobes connected to a data-logger and you are transmitting data remotely via SDI-12, HydroTech E-HUB is the solution you need.

Part number: E-HUB System

HIF Part number: 6107100

You can use an EXO1®, 2 or 3 (You are not limited to EXO3® only)
No need for an EXO® DCP “Signal Output Adapter”
Bluetooth connectivity to your EXO® unit in the field without interruption of your SDI-12 data is available at all time. No need for switches. The Bluetooth signal is always ON.
If you have an EXO® Handheld with a HydroTech EXOBT-V2 module, you can connect to the deployed unit via Bluetooth with your handheld.
No more bare wires to deal with.
The E-HUB includes power management circuitry that allows auto switching power, regulated power, and current spike protection for EXO® multiprobes and internal E-HUB circuitry.

P.O. Box 5520

Round Rock, TX 78683

1700 Bryant Dr. suite 103

Round Rock, TX 78664

Telephone: 512-846-2893

send email